Sharp AQUOS Crystal - Manual (Page 87)

Web and Data 77
Note: Wi-Fi networks are self-discoverable, which means no additional steps are required for your
phone to connect to a Wi-Fi network. It may be necessary to provide a user name and password for
certain closed wireless networks.
Check the Wireless Network Status
Check the status of your current wireless network, including speed and signal strength, through the
Wi-Fi settings menu.
1. From home, touch > Settings > Wi-Fi.
2. Touch the wireless network that the phone is currently connected to. You will see a message box
showing the Wi-Fi network name, status, signal strength, link speed, and other details.
Note: If you want to remove the phone’s wireless network settings, touch Forget on this window.
You need to enter the settings again if you want to connect to this wireless network.
Connect to a Different Wi-Fi Network
Use the Wireless & networks settings to scan for and connect to a different Wi-Fi network.
1. From home, touch > Settings > Wi-Fi. Detected Wi-Fi networks are displayed in the Wi-
Fi networks section. To manually scan for available Wi-Fi networks, touch > Scan.
2. Touch another Wi-Fi network to connect to it.
Note: If the wireless network you want to connect to is not in the list of detected networks, touch
Add network . Enter the wireless network settings and touch Save.
Wi-Fi Advanced Settings
Use the Wi-Fi settings menu to manually set your Wi-Fi connection options.
1. From home, touch > Settings > Wi-Fi.
2. Touch the Wi-Fi slider to turn Wi-Fi on . You will see the names and security settings
of in-range Wi-Fi networks.
l
To disable Wi-Fi, touch the slider again .
3. Touch > Advanced.
4. Select an option from the following to change its settings.
l
Network notification: When enabled, your phone alerts you when a new Wi-Fi network is
available.
l
Keep Wi-Fi on during sleep: Specify when to switch from Wi-Fi to mobile data for data
communications, when the device goes to sleep (when the backlight goes out). This setting