Sharp AQUOS Crystal - Manual (Page 126)

Tools and Calendar 116
Transfer Files Between Your Phone and a
Computer
You can use the supplied USB connector to connect your phone directly to your computer and
transfer music, pictures, and other content files. For example, if you have a music album stored on
your computer that you want to listen to on your tablet with the music player, Google Play Music, or
any other app, just attach your phone to the computer and copy the files to the music folder.
1. Connect your phone to your computer using the supplied micro USB cable.
l
Insert the smaller end of the cable to the charger/accessory jack at the bottom of the phone.
l
Insert the USB end of the cable into an available USB port on your computer. You may need
to remove the USB cable from the charger body to access it.
2. When appears in the notifications area, drag the status bar down to display the notifications
window.
3. You will see either Connected as a media device or Connected as a camera.
l
For most transfers, you’ll want to use Connected as a media device.
l
To change the option, touch it in the notifications window to open the Settings > USB
connection window, and then touch the desired option.
l
If you see Connected as an installer in the notifications window, touch Connected as an
installer, and then Connected as a media device or Connected as a camera.
4. On your computer, navigate to the detected device (such as through the My Computer menu)
and open it.
5. If available, select a drive (card for microSD card, phone for internal phone storage).
6. Select a folder (for example, Music for songs and albums) and copy files to it from your
computer.
7. When you are done, disconnect your phone from your computer.
Update Your Phone
From time to time, updates may become available for your phone. You can download and apply
updates through the Settings > System updates menu.
Important: Update your phone where signal reception is good, and do not change location during
the update process. Make sure the battery is adequately charged before beginning an update. A
weak signal or low battery during an update may cause the update to fail. An update failure may
disable the phone.