Sharp AQUOS Crystal - Manual (Page 140)

Settings 130
Frameless Effect
The Frameless effect settings let you set the effect that appears on the display edges when the
display turns on.
1. From home, touch > Settings > Display.
2. Touch Frameless effect and configure your settings.
l
Display Light On: Choose a display edge effect from Flow, Ambient, Diffusion, or OFF.
l
Flashing alarm: When turned on, the display edge effect is active during an alarm.
l
When start charging: When turned on, the display edge effect becomes active when
charging starts.
Display Mode
The Display mode options let you set the color or tone of the screen.
1. From home, touch > Settings > Display.
2. Touch Display mode and select the options.
l
Standard: Beautiful mode with harmonized colors.
l
Dynamic: Sharp-color mode that presents vibrant pictures and powerful videos.
l
Natural: Authentic-color mode suited for internet shopping.
Lock Screen While on the Call
When Lock screen while on the call is enabled, the screen is locked during calls.
1. From home, touch > Settings > Display.
2. Touch Lock screen while on the call to enable it.
Screen on/off by Motion
The Screen on/off by motion settings let you set the screen to turn on/off according to phone
movement or operation.
1. From home, touch > Settings > Display.
2. Touch Screen on/off by motion and set the options.
l
Sweep ON: When enabled, you can swipe the screen when it is Off to turn it On.
l
Shake OFF: When enabled, you can shake the phone left and right twice to turn the screen
Off.