Interlogix NX-8E Installation Manual - Manual (Page 49)

Chapter 2: Reporting codes
NX-8E Control Panel Installation Manual 45
day programmed. The default is to begin daylight saving time on the second
Sunday in March and end on the first Sunday in November.
Segment 1
Daylight saving time starting month (1 to 12). Default is 3.
Segment 2
Daylight saving time starting Sunday (1 to 4, first to fourth). Default is 2.
Segment 3
Daylight saving time ending month (1 to 12). Default is 11.
Segment 4
Daylight saving time ending Sunday (1 to 4, first to fourth). Default is 1.
Locations 85 to 87 - Reserved
Locations 88 to 109 - Partition account codes and
features.
If a location is left unprogrammed, the feature for partition 1 and account code for
the phone number will be used.