beautypg.com

Interlogix NX-8E Installation Manual User Manual

Page 24

background image

Chapter 2: Reporting codes

20

NX-8E Control Panel Installation Manual

Data Format

Description

11

4+2 express

Two-digit event code DTMF transmission.

12

4+2 fast

Two-digit event code 1900 Hz transmit 1400 Hz handshake double
round parity 20 pps.

13

Ademco contact
ID

DTMF (see

“Reporting Ademco Contact ID transmissions” on page

69.

14

SIA

Frequency shift keys (see

“Reporting fixed codes in Contact ID and

SIA

” on page 66).

15

Custom format

See

“Location 18 - Custom communicator format” on page 25.

Location 3 - Phone 1 dial attempts/backup control

Location 3 has two segments of numerical data.

Segment 1 - Phone 1 dial attempts

Program the number of dial attempts (1 to 15) the communicator makes to phone 1 before ending
the notification process. The default is 8, which means that the communicator makes eight
attempts to the first number.

Segment 2 - Phone 1 backup control

Program the backup control for phone 1. The default is 0.

0 = The NX-8E will make the designated number of attempts to phone 1 before setting the fail to
communicate condition to stop reporting.

1 = The NX-8E will stop trying to communicate after the designated number of attempts have
been made to phone 1.

2 = The NX-8E will make the dial attempts in increments of two. The first two attempts are made
to phone 1, the next two attempts to phone 2. This repeats until the total number of attempts
designated in segment 1 is completed.

Location 4 - Phone 1 events reported

Location 4 has two segments of feature selection data. Use this location to select
those events reported to phone 1.

• If you do not want dual or split reporting, use Location 4 to select all events to

phone 1. Location 5 should be left at the factory default of 0.

• If you want dual or split reporting and the split is based on the event type

(alarm, open/close, etc.), use Location 4 to select only those events that are
reported to phone 1.

• If you don’t want events reported to phone 1, program 0 in Location 4

(disabling all options).