Interlogix NX-8E Installation Manual - Manual (Page 45)

Chapter 2: Reporting codes
NX-8E Control Panel Installation Manual 41
Locations 52 to 55 - Times and days
Location 52 - Opening/automatic disarm time
Location 52 has two segments of numerical data. Use this location to program
the time (24-hour format) in which the NX-8E enables codes designated as arm
only after closing. This time is only valid on those days programmed in Location
54.
Segment 1 - Program the hour in military time of the opening time. Default is 8.
Segment 2 - Program the minutes after the hour of the opening time. Default is 0
Note: For autoarm, auxiliary outputs, or code authorization to function properly,
make sure the opening time is earlier than the closing time.
Note: If using scheduled event outputs, enter an open time even if the panel is
not auto arming/disarming.
Location 53 - Closing/automatic arming time
Location 53 has two segments of numerical data. Use this location to program
the time (24-hour format) in which the NX-8E disables the disarm capability for
codes designated as arm only after closing. This is also the time the automatic
arming sequence begins if enabled in Location 55.
Segment 1 - Program the hour in military time of the closing/autoarm time. Default is 20.
Segment 2 - Program the minutes after the hour of the closing/autoarm time. Default is 0
Location 54 - Days of week each partition is open
Location 54 has eight segments of feature selection data. Use this location to
select which days of the week each partition is open. On these days, arm only
after close window codes are able to arm and disarm during open window. On
days not selected here, arm only after close window codes are not disarmed
(Locations 52 and 53).
Note: If the system is not programmed to be opened and is programmed to
autoarm, the NX-8E tries to arm every 45 minutes for the duration of the closed
period unless auto retry is disabled (Location 55).
For each segment (1 to 8), select from the following:
1 = Sunday 2 = Monday 3 = Tuesday 4 = Wednesday
5 = Thursday 6 = Friday 7 = Saturday 8 = Reserved