Compaq PROLIANT 3000 - Manual (Page 95)

5-7
ProLiant 3000 Setup and Installation Guide
Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002
File Name: F-CH05.DOC Last Saved On: 1/27/98 4:22 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Configuring Hardware
When you select the Configure Hardware menu, a screen with five steps is
displayed. Below is a listing of each step with a brief explanation.
Step 1: Important System Configuration
Information
This step provides an overview of the configuration process.
Step 2: Add or Remove Boards
Use this step to add the PCI or EISA boards to the configuration or remove any
boards from the configuration.
Step 3: View or Edit Details
Use this step to make necessary configuration changes.
IMPORTANT: If you edit a function or resource in Step 3, be sure also to
review Step 4.
Step 4: Examine Required Switches
This step displays the required switch and jumper settings for most ISA boards.
Then find the appropriate board’s switch and jumper settings and adjust them to
match the settings displayed on the screen.
Step 5: Save and Exit
Use this step to save the configuration update when you have made changes.