Compaq PROLIANT 3000 - Manual (Page 101)

5-13
ProLiant 3000 Setup and Installation Guide
Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002
File Name: F-CH05.DOC Last Saved On: 1/27/98 4:22 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Configuring PCI
Boards Automatically
The system ROM automatically configures PCI boards. If a user selection is
required, a POST message directs you to run the System Configuration Utility.
Also, you may use the System Configuration Utility to change the default
automatic settings.
Removing Boards
System ROM automatically reconfigures the server after a PCI board or DIMM
is removed.
Installing an Operating System
Compaq ProLiant 3000 servers support the following operating systems:
■ Novell NetWare 3.12, 4.10, 4.ll, and IntraNetWare
■ Microsoft Windows NT 3.51 and 4.0
■ SCO OpenServer 3.0, 5.0, and 5.02
■ SCO UnixWare 2.1
■ IBM OS/2 2.x, Warp 3.0, Warp 4.0, Warp Server 4.0, Warp Server
Advanced 4.0, and Warp Server Advanced with SMP 4.0
■ Banyan VINES v 6.00 and above, including VINES 7.00
When you select the Operating System Installation feature from the System
Configuration Utility main menu, the utility provides prompts to simplify
the installation.
First the utility prompts you to select the correct operating system. Use the
arrow keys to select the operating system and press the Enter key. The utility
then prompts you for the operating system CD or diskette.