Compaq PROLIANT 3000 - Manual (Page 18)

1-2 Compaq ProLiant 3000 Server Features
Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002
File Name: B-CH01.DOC Last Saved On: 1/27/98 4:09 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Cache Memory and System Architecture
■ 512-KB secondary (L2) cache
■ Compaq ProLiant 3000 System Architecture with Dual Memory
controllers and Dual Peer PCI buses
System Memory
■ 64-MB standard, extended data out (EDO), error checking and
correcting (ECC) DIMMs
■ Supports EDO buffered, 60-ns or faster, 32-, 64-, 128-, or 256-MB, , 4-K
or 8-K refreshed DIMMs.
NOTE: Memory option kits contain two DIMMs to equal the total memory.
For example, the 32-MB option kit contains two 16-MB DIMMs.
■ Expandable to 512 MB (for 300 MHz models) or 3 GB (for 333MHz
models)
■ Supports up to 6 memory banks, each bank consisting of 2 DIMMs. One
bank is installed or removed at a time. Each bank must have each two
DIMMs of the same size and speed.
Expansion Slots
Eight I/O expansion slots:
■ Five dedicated PCI slots
■ Three shared PCI/EISA slots
■ Pre-installed Compaq Netelligent 10/100 TX PCI UTP Controller