Compaq PROLIANT 3000 - Manual (Page 107)

5-19
ProLiant 3000 Setup and Installation Guide
Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002
File Name: F-CH05.DOC Last Saved On: 1/27/98 4:22 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Banyan VINES Device Drivers from Compaq
Your server must have certain device drivers for some server options to operate
using the Banyan VINES operating system. Compaq provides driver support for
Banyan VINES 6.00 and above, including the new VINES 7.00.
These drivers are located on the Compaq SmartStart and Support Software CD
you received with your server. You can use SmartStart to create a Banyan
VINES Support Software Diskette (SSD) from Compaq to support a manual
installation of Banyan VINES.
There are two types of SSDs:
■ LAN Adapter SSD
■ Peripheral Adapter SSD
These SSDs contain the README files that list available drivers and driver
installation procedures.
These drivers can also be ordered through SoftPAQ and can be downloaded
from the Compaq Web site.
Manual installation
If you choose not to let SmartStart configure the server, follow this procedure:
1. Insert the Compaq SmartStart and Support Software CD into the drive.
2. Boot your system.
3. Select Non-SmartStart Setup.
4. Follow the instructions that display on the monitor.