beautypg.com

Starting the system configuration utility – Compaq PROLIANT 3000 User Manual

Page 93

background image

5-5

ProLiant 3000 Setup and Installation Guide

Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002

File Name: F-CH05.DOC Last Saved On: 1/27/98 4:22 PM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

Starting the System
Configuration Utility

To start the Compaq System Configuration Utility for the first time, refer to the
SmartStart Installation poster.

After the first time, access the System Configuration Utility as follows:

1. Press

the

Ctrl+Alt+Del keys to reboot the server.

2. When the following prompt appears at the top of the screen during

Power-On Self-Test (POST), press the F10 key. The System
Configuration Utility main menu displays the following:

Press "F10" key for System Partition Utilities

IMPORTANT: The text appears for only two seconds. If you do not press
F10 during this time, you must reboot the server.