Flintec MCS-08 - Manual (Page 10)

MCS-08 Technical Manual, Rev. 1.04 December 2012 Page 10 of 52
3.4. Accessories
Accessories supplied with the modules
The following accessories are supplied together with the modules.
If any part is missing, please contact your supplier.
MCS
-0
8A
D
MCS
-0
8IO
MCS
-0
8DP
MCS
-0
8P
B
MCS
-0
8P
N
MCS
-0
8M
B
MCS
-0
8E
N
4-pin and 5 mm pitch plug, light gray, power connector 1 1 1 1 1 1 1
5-pin and 3.81 mm pitch plug, light gray, N-bus connector 1 1 2 2 2 2 2
3-pin and 3.81 mm pitch plug, green, RS232C or RS485 1 1 2 1
7-pin and 3.81 mm pitch plug, black, for load cell cable 1
5-pin and 3.81 mm pitch plug, green, for digital inputs 1
8-pin and 3.81 mm pitch plug, green, for digital outputs 1
Installation CD (xFace software, technical documentation) 1 1 1 1
Table 3.1 – Accessories supplied with instrument
Accessories sold separately
The following accessories are available from Flintec.
MCS
-0
8A
D
MCS
-0
8IO
MCS
-0
8DP
MCS
-0
8P
B
MCS
-0
8P
N
MCS
-0
8M
B
MCS
-0
8E
N
RS-232C cable (3 m long) for connection with PC 1 1 1 1
Junction box for load cell connection Refer to Flintec catalog
Open end load cell cable, 6 wire ( 0.22 cm
2
each ) Max. 200 meter length
Table 3.2 – Accessories supplied separately