EVCO EPH4DXP1SA - Manual (Page 22)

EVCO S.p.A. c-pro 3 hecto MCSA | User manual ver. 2.0 | Code 144MCSAE204
page 22 of 52
Under the MANUALE (MANUAL) menu it is possible to set the loads in manual/automatic modes and the outputs can be
forced to test their functionality.
Under the CALIBRATION menu the offsets of the sensors used can be set.
In the STATO I/O (I/O STATUS) menu, it is possible to directly display the status of the board physical inputs and
outputs.
3.10 Installer Menu
The installer menu is level 3, i.e. an installer level password must be introduced in order to display/modify the
parameters present in this branch.
The installer manual includes all parameters relative to the functionality configuration (alarms, regulations, logics,
features,...) of the unit. By pressing the ENTER key on the “INSTALLER MENU” text, enter the page to change the
password (PSd3).
The ZONES menu can be used to set/display the parameters relative to the zones.
In the COLLETTORI (COLLECTORS), DEUMIDIFICATORE (DEHUMIDIFIER), LINEA (LINE), POMPA (PUMP), VALVOLA
(VALVE) menus, it is possible to set the parameters relative to management of the devices:
• regulation parameters
• times
• functionality...
In the ALARMS menu, find all parameters regarding the alarms and the management of the safety devices:
• enablings
• signalling delays
• type of rearm
In the VARIOUS menu, find other general parameters:
• Modbus communication