EVCO EPH4DXP1SA - Manual (Page 19)

EVCO S.p.A. c-pro 3 hecto MCSA | User manual ver. 2.0 | Code 144MCSAE204
page 19 of 52
3.4 Alarms/log menu
This menu contains the functionalities linked to the controller alarms and the systems alarm log.
3.4.1 Alarms log
In order to display the system alarms log, press ENTER on “log”.
If no elements are present, the “NO ALARMS” wording is used, otherwise the following page is shown, which states the
information of the last element memorised in the log:
To display the previous element, press ENTER on “>>”. By repeating this procedure, scroll all log elements until
reaching the first element inserted; on request of the successive element from here, the last element memorised is
proposed: log display is circular.
To exit the log pages, press the ESC key or wait for the 60 timeout seconds. This level is not protected by a password.
3.4.2 Active alarms reset
To reset the active alarms just press the SET key for 3 seconds from the alarm page.
3.4.3 Alarms log reset
To reset the alarms log, operate on parameter PH18.
3.5 Clock menu
From this menu it is possible to set/modify the value of the c-pro3 hecto MCSA controller date and real time.
Log status
Ok: correct reading
Empty: empty memory
Overflow: memory full
Error: log reading failed
Date and time of the alarm
Progressive number memorised
Alarm code