Comtrol Multiport Modems Windows NT - Manual (Page 5)

Overview 5
Overview
The following subsection gives you information that you need to prepare your
system for installing a RocketPort adapter.
How to Use this Document
You can use the interactive Table of Contents to locate the information you need.
Driver Requirements
This document discusses installing and configuring the RocketPort and
RocketModem device driver for the Windows NT operating systems:
• Microsoft
®
Windows
®
NT 4.0
• Citrix ® WinFrame ® (1.8)
This driver supports the following products:
• RocketPort ISA
• RocketPort PCI (4J, 8/16/32-port, and Quad/Octacable models)
• RocketPort Universal PCI (Quad/Octacable models)
• RocketPort Universa PCI Low Profile (4 and 8-port)
• RocketPort PCI/422
• RocketPort 485
• RocketPort Plus (2, 4, 8-port andvQuad/octacable)
• RocketModem ISA
• RocketModemII PCI
Note: The readme.txt file that is delivered with the driver may contain additional
information not published in this document.
Driver updates can be downloaded at no charge from the Comtrol ftp/web site.
Always check the web or ftp sites to make sure that you have the current driver
and documentation. Software downloaded from the ftp/web site are self-extracting
zipped files that you must extract before installing.
Locating Hardware Installation Documentation
For hardware specific information or product information, see the hardware
installation documentation that is available on the Comtrol CD shipped with your
product, or you can download the current version from the
ftp/web site .