Changing or viewing adapter configuration, You can view or change the following as desired – Comtrol Multiport Modems Windows NT User Manual
Page 17
Driver and Adapter Information
17
Changing or Viewing Adapter Configuration
Changing or Viewing Adapter Configuration
To view or change adapter configuration after installation, follow these steps:
1.
Start the Comtrol Setup program. The Main Setup tab appears:
2.
In the Configuration list, select on the adapter you want to work with and
select the Properties button.
Note: The Summary group displays the basic device configuration, as entered
using the Add Device Wizard. If this information is not correct, you
must remove and re-add the device.
3.
You can view or change the following as desired:
a.
Name. The default device name is assigned by the Add Device Wizard. If
desired, you can enter a more descriptive name.