Comtrol Multiport Modems Windows NT - Manual (Page 12)

Driver and Adapter Information 12
Driver Installation
9. When you have finished entering adapter configuration information, select the
Finish button. The appropriate Device Setup tab appears:
10. Review the information shown. If desired, you can enter a more descriptive
name for the adapter, change the base I/O address setting (ISA-bus only), or
change the COM number assigned to the first port on the adapter.
11. Select the OK button to save the device configuration. The Main Setup tab
appears:
12. If you have installed more than one adapter, you may configure more adapters
at this time. Select the Add button, then repeat Steps 8 through 11 for each
additional adapter installed.
RocketPort PCI Example