Comtrol ES7510-XT - Manual (Page 48)

48 - Basic Settings RocketLinx ES7510-XT User Guide: 2000571 Rev. D
Configuration Using the Web Interface
Basic Settings
The Basic Setting group allows you the ability to configure switch information, IP address, User name/
Password of the system. It also allows you to do firmware upgrade, backup and restore configuration, reload
factory default, and reboot the system.
The following web pages are included in this group:
• Switch Setting on Page 48
• Admin Password on Page 49
• IP Configuration on Page 50
• Time Setting on Page 52
• DHCP Server Configuration on Page 55
• DHCP Leased Entries on Page 57
• DHCP Relay Agent on Page 58
• Backup and Restore on Page 60
• Firmware Upgrade on Page 64
• Load Default on Page 66
• System Reboot on Page 66
Optionally, you can use the CLI for configuration, see Basic Settings (CLI) on Page 144.
Switch Setting
You can assign the System Name, Location, Contact and view ES7510-XT information.
Switch Setting Page
System Name
You can assign a name to the ES7510-XT. You can input up to 64 characters. After
you configure the name, The CLI system selects the first 12 characters as the name
in CLI system.
System Location You can specify the ES7510-XT physical location with up to 64 characters.
System Contact
You can specify contact people with up to 64 characters by typing the Administer’s
name, mail address or other information.
System OID
The SNMP Object ID of the ES7510-XT. You can follow the path to find its private
MIB in an MIB browser.
Note: When you attempt to view private MIB, you should first compile private MIB
files into your MIB browser.
System Description RocketLinx ES7510-XT Industrial Managed PoE Plus Switch.
Firmware Version Displays the firmware version installed in this ES7510-XT.