Comtrol ES7510-XT - Manual (Page 26)

26 - Uploading Firmware to Multiple ES7510-XT Switches RocketLinx ES7510-XT User Guide: 2000571 Rev. D
Using PortVision DX
Uploading Firmware to Multiple ES7510-XT Switches
You can use this procedure if your ES7510-XT is connected to the host PC, laptop, or if the ES7510-XT resides
on the local network segment.
Note: Technical support does not advise uploading bootloader to multiple ES7510-XT switches. Remember
that uploading firmware reboots the ES7510-XT, which depending on your network connections may
cause firmware uploading to fail on another ES7510-XT.
1. If the ES7510-XT is not displayed in PortVision DX, click the
Scan button.
2. Select the Comtrol Ethernet attached product type and click the
Scan but
ton.
3. Shift-click the multiple ES7510-XT switches on the Main screen
that you want to update and use one of the following methods:
• Click the Upload button.
• Right-click and then click Advanced > Upload Firmware.
• Click Advanced >Upload Firmware in the Manage menu.
4. Browse, click the firmware (.bin) file, Open (Please locate the new firmware), and then click Yes (Upload
Firmware).
It may take a few minutes for the firmware to upload onto all of the ES7510-XT switches. The ES7510-XT
reboots itself during the upload process.
5. Click Ok to the advisory message about waiting to use the device until the status reads ON-LINE.
In the next polling cycle, PortVision DX updates the Device List pane and displays the new firmware version.