Smtp configuration – Comtrol ES7510-XT User Manual
Page 121
RocketLinx ES7510-XT User Guide: 2000571
Rev. D
SMTP Configuration - 121
Configuration Using the Web Interface
SMTP Configuration
The ES7510-XT supports an email alert feature. The ES7510-XT sends the events that have occurred to a
remote email server. The email warning conforms to the SMTP standard.
The E-mail Alert page allows you to assign the SMTP Server IP, Sender E-mail, and Receiver E-mail. If the
SMTP server requests authentication, you can set up the user name and password.
SMTP Configuration Page
SMTP Server IP Address
Enter the IP address of the email server.
Mail Account
The mail account for the SMTP server.
Authentication
Click the check box to enable password.
User Name
Enter an email account name (maximum 40 characters).
Password
Enter the password of the email account.
Confirm Password
Re-type the password of the email account.
You can set up to 4 email addresses to receive email alarm from the ES7510-XT.
Rcpt E-mail Address 1
The first email address to receive an email alert from the
ES7510-XT (maximum 40 characters).
Rcpt E-mail Address 2
The second email address to receive an email alert from
the ES7510-XT (maximum 40 characters).
Rcpt E-mail Address 3
The third email address to receive an email alert from
the ES7510-XT (maximum 40 characters).
Rcpt E-mail Address 4
The fourth email address to receive an email alert from
the ES7510-XT (maximum 40 characters)
Apply
Click Apply to apply the settings.
Note: You must Save the settings (
), if you want
to maintain these settings if the ES7510-XT is
powered off.