Comtrol ES7510-XT - Manual (Page 133)

RocketLinx ES7510-XT User Guide: 2000571 Rev. D Using the Serial Console - 133
Configuration Using the Command Line Interface (CLI)
• HyperTerminal (Windows XP, unless installed manually)
- Windows XP: Go to Start -> Program -> Accessories -> Communications -> HyperTerminal
- Enter a name for the new console connection and click OK.
- Enter the IP address in the Host Address text box.
- Select TCP/IP (Winsock) in the Connect using drop-list and click Ok.
- Set the serial settings using the Serial Settings table (above).
- Press the Enter key in the Terminal window.
- After it is connected, you can see the Switch login request, go to Step 3
3. Log in to the switch. The default user name is admin, password, admin.
4. If necessary, configure the IP address for your network. The following example shows how to program an
IP address of 192.168.11.252 with a Class B subnet mask (255.255.0.0).
Switch> enable
Switch# configure terminal
Switch(config)# int vlan1
Switch(config-if)# ip address 192.168.11.252/16