Comtrol ES7510-XT - Manual (Page 178)

RocketLinx ES7510-XT User Guide: 2000571 Rev. D Multicast Filtering (CLI) - 179
Configuration Using the Command Line Interface (CLI)
IGMP Snooping (Continued)
Display – IGMP
Snooping Setting
Switch# sh ip igmp
interface vlan1
enabled: Yes
version: IGMPv1
query-interval; 125s
query-max-response-time: 10s
Switch# sh ip igmp snooping
IGMP snooping is globally enabled
Vlan1 is IGMP snooping enabled
Vlan2 is IGMP snooping enabled
Vlan3 is IGMP snooping disabled
Display – IGMP Table
Switch# sh ip igmp snooping multicast all
VLAN IP Address Type Ports
---- --------------- ------- ------------------------
1 239.192.8.0 IGMP 6,
1 239.255.255.250 IGMP 6,
IGMP Query
IGMP Query V1
Switch(config)# int vlan 1
Switch(config-if)# ip igmp v1
IGMP Query V2
Switch(config)# int vlan 1
Switch(config-if)# ip igmp
IGMP Query version
Switch(config-if)# ip igmp version 1
Switch(config-if)# ip igmp version 2
IGMP Query Interval
Switch(config)# int vlan 1 (Go to management VLAN)
Switch(config-if)# ip igmp
Switch(config-if)# ip igmp query-interval 60 (Change query
interval to 60 seconds, default value is 125 seconds)
IGMP Query Max
Response Time
Switch(config)# int vlan 1 (Go to management VLAN)
Switch(config-if)# ip igmp
Switch(config-if)# ip igmp query-max-response-time 15 (Change
query max response time to 15 seconds, default value is 10
seconds)
Disable
Switch(config)# int vlan 1
Switch(config-if)# no ip igmp