Global configuration mode – Comtrol ES7510-XT User Manual
Page 139
RocketLinx ES7510-XT User Guide: 2000571
Rev. D
Global Configuration Mode - 139
Configuration Using the Command Line Interface (CLI)
Global Configuration Mode
If you type configure terminal in Privileged EXEC mode, you can then access Global Configuration mode. In
Global Configuration mode, you can configure all ES7510-XT features. Type the following commands and
press the Enter key:
•
interface IFNAME/VLAN, to access the corresponding Interface Configuration mode.
•
exit to return to Privileged EXEC mode.
•
? to see the command list.
•
list to review the Global Configuration mode commands and corresponding options.
The following is a list of available command lists of Global Configuration mode. For the complete list of
commands and options, refer to
Switch# configure terminal
Switch(config)#
administrator
Administrator account setting
arp
Set a static ARP entry
clock
Configure time-of-day clock
default
Set a command to its defaults
dot1x
IEEE 802.1x standard access security control
end
End current mode and change to enable mode
ethertype
Ethertype
exit
Exit current mode and down to previous mode
gmrp
GMRP protocol
gvrp
GARP VLAN Registration Protocol
hostname
Set system's network name
interface
Select an interface to configure
ip
IP information
ipv6
IP information
lacp
Link Aggregation Control Protocol
list
Print command list
lldp
Link Layer Discovery Protocol
log
Logging control
loop-protect
Ethernet loop protection
mac-address-table Mac address table
mirror
Port mirroring
modbus
Modbus TCP slave
nameserver
DNS Server
netvision
NetVision protocol
no
Negate a command or set its defaults
ntp
Configure NTP
poe
Configure Power over Ethernet
ptpd
IEEE1588 Precision Time Protocol