Privileged exec mode – Comtrol ES7510-XT User Manual
Page 138
138 - Privileged EXEC Mode
RocketLinx ES7510-XT User Guide: 2000571
Rev. D
Configuration Using the Command Line Interface (CLI)
Privileged EXEC Mode
If you type enable in User EXEC mode, you can access Privileged EXEC mode. In this mode, the ES7510-XT
allows you to view current configuration, reset default, reload switch, show system information, save
configuration, and enter Global Configuration mode.
Type the following commands and press the Enter key:
•
configure terminal to access Global Configuration mode (
•
exit to close the CLI.
•
? to see the command list.
•
list to review the Privileged EXEC mode commands and corresponding options.
For the complete list of commands and options, refer to
Switch>enable
Switch#
archive
manage archive files
clear
Reset functions
clock
Configure time-of-day clock
configure Configuration from vty interface
copy
Copy from one file to another
debug
Debugging functions
disable
Turn off privileged mode command
dot1x
IEEE 802.1x standard access security control
end
End current mode and change to enable mode
exit
Exit current mode and down to previous mode
hardware Hardware function
list
Print command list
no
Negate a command or set its defaults
pager
Terminal pager
ping
Send echo messages
quit
Exit current mode and down to previous mode
reboot
Reboot system
reload
copy a default-config file to replace the current one
show
Show running system information
telnet
Open a telnet connection