Memo, Vcr vcrgclííiísítti cd cmm, 4 ístiiéísiísetupí$®2?j> ü o – Pioneer VSX-D810S User Manual
Page 74: M ’ íf± mmmìtim m lik > mm^ms, M ’ mmm\mxmw^aem, 7 ©tmísiíenter (lüa), Mmmm, Plilíb, 4 ístiiéísiísetupí$®2?j
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

VCR
VCR or Digital Video
Recorder
CD
CD player
CD-R
CD Recorder, Tape
deck or MD
TVC
TV or Cable TV tuner
TUN
FM/AM tuner
4 Press and hold SETUP for
two seconds.
A batch of 10 codes is transmitted
and the LED blinks during
transmission. If you see the
component respond, by stopping
(for playback components only) or
switching off, go on to the step 5,
otherwise repeat this step.
If you want to cancel the search
mode, press and hold MUTING for
three seconds (During LED blinks,
it cann’t be cancelled).
5 Switch the component back
on or restart playback.
6 Use the A V buttons to scan
through the last 10 codes
transmitted to identify the
correct code.
The LED will blink during
transmission of the code. Stop
when you see the component stop
or switch off.
You can also verify you have the
correct code by pressing PLAY,
STOP, VOL +/-, etc.
7 Press and hold ENTER for
three seconds to save the
preset code.
The remote control automatically
returns to normal usuage.
MEMO:
• After the remote control has
transmitted all the codes it will go
back to the first code and start
transmitting them again
automatically.
VCR
VCR o grabadora de
vídeo digital
CD
Reproductor de CDs
CD-R
Grabadora de CDs,
platina de cintas o MD
TVC
TV o sintonizador para
TV por cable
TUN
Sintonizador FM/AM
4 Pulse y mantenga pulsado
SETUP durante dos
segundos.
Se transmitirá un lote de 10
códigos y el LED parpadeará
durante la transmisión. Si ve que
el componente responde
deteniéndose (sólo para
componentes reproductores) o
apagándose, vaya al paso 5. De lo
contrario repita este paso.
Si desea cancelar el modo de
búsqueda, pulse y mantenga
pulsado MUTING durante dos
segundos. 3 segundos (durante los
parpadeos del LED no se puede
seleccionar el modo de búsqueda).
5 Vuelva a encender el
componente o reanude la
reproducción.
6 Utilice los botones A V para
examinar los últimos 10
códigos transmitidos para
identificar el código correcto.
El LED parpadeará durante la
transmisión del código. Deténgase
cuando vea detenerse o apagarse al
componente. También puede
verificar que ha encontrado el
código correcto pulsando PLAY,
STOP, VOL+/-, etc.
7 Pulse y mantenga pulsado
ENTER durante tres
segundos para guardar el
código predefinido.
El mando a distancia retorna
automáticamente a su uso normal.
MEMO:
• Después de haber transmitido
todos los códigos ,el mando a
distancia regresará al primer
código y comenzará a transmitirlos
de nuevo automáticamente.
VCR VCRgclííiÍSÍtti
CD
cmM§,
CD-R
cmm^ -
MD
TVC
TUN FM/AM filfH
4 íSTiIÉíSiíSETUPÍ$®2?j>
Ü o
ajSHi-ffliofflmi ’
ft.
led
P
ai
^ -
m
’ íf± mmmìTim m
liK > mm^ms >
SíiMUTING (ifW) 3&'S
(LEDfATji0#,fiÍ?ÉM) °
ínl °
’ LEDfATii o
m\
ir °
ÜlPlgTPLAY (fi®) ’STOP
’ V0L+/“ (
h
'
m
)
m
’ mmm\mxmw^AEm °
7 ©TMÍSiÍENTER (lüA)
mmmm -
51 °
PlilÍB =
74
En/Sp/ChH