Section vili. care of your machine, Replacing the light bulb, Cleaning the feed dogs – Kenmore 385.15512 User Manual

Page 70

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SECTION Vili. CARE OF YOUR MACHINE

NOTE: Unplug the machine

Do not dismantle the machine other than as
explained in this section
Do not store the machine in a high-humidity area,

near a heat radiator or in direct sunlight.
Clean the outside of the machine with a soft cloth
and mild soap.

Replacing the Light Bulb

CAUTION: As the light bulb could be HOT, protect your

fingers when you handle it.

Unplug the machine and open the face cover. While pushing

the bulb up, turn it counterclockwise to remove. Put in a

new bulb by pushing it up and turning it clockwise.

Cleaning the Feed Dogs

Unplug the machine and remove the presser foot and needle

with a screwdriver.

Remove the needle plate with a screwdriver.

Use a lint brush to clean the feed dogs..

Replace needle plate and tighten with a screwdriver.