Inserting bobbin – Kenmore 385.15512 User Manual

Page 30

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

• Inserting bobbin

[T] Place a bobbin in the bobbin case making sure

thread feeds clockwise coming from the bobbin.

Draw the thread through the slot of case.

[U Continue to draw the thread under the tension spring and

through the opening

Pull out about 4" (10 cm) of thread .

in Holding latch open, position the bobbin case into the

shuttle and release latch

Case should lock into place when latch is released