Lace work, Multiple zigzag stitch, Lace work multiple zigzag stitch – Kenmore 385.15512 User Manual
Page 56
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Lace Work
0 Stitch selector:
5
(?) Stitch length;
1 to 3
(3) Needle thread tension: 1 to 4
@ Presserfoot:
Zigzag foot
Lace adds a fanciful, feminine touch to blouses and
lingerie. Table linens and pillows become more
elegant when trimmed with lace.
Fold raw edge of fabric at least 5/8" (1.5 cm). Place
lace underneath and topstitch with blind hem stitch
Trim excess fabric close to stitching,
PATTERN
LENGTH
Multiple Zigzag Stitch
0 Stitch selector:
4
0 Stitch length;
0 5 to 1
0 Needle thread tension: 1 to 4
0 Presserfoot:
Zigzag foot
This is used to finish seam allowance on synthetics and
other fabrics that tend to pucker, The stitch is also excellent
for darning and mending tears.
Q] Seam finishing
Place fabric under the presser foot in such a manner that
the edge is slightly inside the right-hand side of the presser
foot. Guide the fabric so that the right hand stitches fall at
the edge of the fabric.
r
.J
9
PATTERN
LENGTH
[
2
] Mending
Position tear under the needle so that the stitch catches
both sides.
48