Threading the machine – Kenmore 385.15512 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Threading the Machine
• Threading the machine
‘Raise the thread take-up lever to its highest position by
turning the handwheel counterclockwise, toward you.
‘Raise the presser foot iifter
‘Place a spool on the spool pin, with thread coming off as
shown.
[T]
Draw the end of thread around the upper thread guide
[
2
] While holding the thread near the spool, draw the end of
the thread down around the check spring holder.
[
3
] Firmly draw the thread up from right to left over
the take-up lever and down into the take-up lever
eye.
0 Slide the thread behind the needle bar thread guide on the
left
12 Thread the needle from front to back or use a needle
threader.
We recommend using the convenient neediethreader
(#200262101), included with your machine.