Setting spool pins, Presser foot lifter, Thread cutter – Kenmore 385.15512 User Manual

Page 16: Accessory box

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Setting Spool Pins

® Spool pin

The spool pins are used for holding the spools of
thread when feeding thread to the machine.
To use, pull up the spool pins. Push down for storage.

Presser Foot Lifter

0 Presser foot lifter

(5) Normal up position
(D Highest position

The presser foot lifter raises and lowers your presser foot.
You can raise it about 1/4" (0.6 cm) higher than the

normal up position for easy removal of the presser foot

or to help you place heavy fabric under the foot.

Thread Cutter

You do not need a pair of scissors to cut threads after sewing.
Just use the built-in thread cutter.

Accessory Box

open the cover of the accessory box toward you. Sewing
accessories are conveniently located in the box.