beautypg.com

Cleaning the hook race and feed dogs, Assemble the hook race – Kenmore 385.19005 User Manual

Page 81

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

SECTION Vil. CARE AND MAINTE­
NANCE

Cleaning the Hook Race and Feed Dogs

Q] Remove the setscrew on the needle plate with the

screwdriver supplied with the machine. Remove the needle

plate,

d] Take out the bobbin Lift up the bobbin holder and remove

Q] Clean the bobbin holder with a lint brush.

(You may also use a vacuum cleaner)

0

]

Clean the feed dogs and hook race with the lint brush

[5J Clean the hook race with a dry cloth.

{'ifeu may also use a vacuum cleaner)

Qj Screwdriver'
d) Setscrew

(D

Needle plate

® Bobbin holder
(D Lint brush
® Feed dogs

(Z) Hook race
® Soft dry cloth

Assemble the Hook Race

[D Insert the bobbin holder,
O The knob of the bobbin holder should fit next to the StoDoer

in the hook race.

S Reattach the needle plate, aligning the needle plate guide

pins with the guide holes on the needle plate and tighten

the screw.

® Stopper
® Knob
® Guide holes

"Note:

After cleaning the machine, make sure the needle and
presser foot are attached

76