beautypg.com

Kenmore 385.19005 User Manual

Page 34

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Ili Raise and release foot, and re-attach it on left-hand side

of pin.

Take the upper fabric layer and lay it flat over the zipper.

Starting just below zipper bottom stop, sew across fabric
to about 3/8'to 1/2'distance from the basting stitch line

Turn fabric 90“ and sew a seam the entire length of

zipper tape. Before reaching puiNab, stop the machine
with needle in fabric and raise the foot. Use seam ripper
to open a few inches of basting stitch, then unzip a few
inches to clear a path for the stitch. At the end of the
zipper tape, sew in reverse a few stitches to lock
Once both sides of zipper are sewn, use seam ripper to
open the basting stitch

29