Kenmore 385.19005 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
o Inserting the bobbin
(T)
End of thread
@ Notch
i|) Notch
® Threading diagram
[T]
Piace a bobbin in the bobbin holder with the thread
running off counterclockwise.
Guide the thread into the notch (|) on the front side of
the bobbin holder.
I Draw the thread to the left, sliding it between the tension
spring blades.
[ij Continue to draw the thread lightly until the thread slips
info notch fl). Pull out about 6" (15 0 cm) of thread.
Attach the hook cover plate. Check the threading by
referring to the diagram ® shown on the hook cover plate.
m
la
ffl
a
15