Selecting card designs – Kenmore 385.19005 User Manual

Page 70

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

» To Insert the ATA PC card

Insert the SanDisK® CompactFlash that contains saved
stitch data into the San Disk® CompactFiash PC card
adapter Then insert the adapter into the slot with the front
side of card tl > facing you.

Push the card untii it clicks, and the eject button (

) pops

out,

(T) SanDisk® CompactFlash PC card

When the card is properly set, the red bar on the eject

button (|j will appear

■T) Eject button
¡ 3) Red bar

ATA PC Card (Optional)

To eject the ATA PC card

Press the eject button (|) to eject the ATA PC card
Take out the ATA PC card from the machine.

Notes:

» Use only Sandisk® CompactFlash 128MB or smaller to

store stitch data.,

»Use oniy Sandisk® CompactFlash PC card adapter.

Selecting Card Designs

After inserting a card into your machine, you can view and

select its designs in the embroidery mode,
Press the embroidery mode key <]) to enter the embroidery
mode

(T) Embroidery mode key

C|)

ATA PC card key

Press the ATA PC card key (2)-The patterns in the card are

displayed in the first page.

CAUTION:

Do not turn the power off or eject the card while the

warning sign or hourglass is displayed on the
visual touch screen. Otherwise, data stored in the

memory may be lost or damaged_________________