Kenmore 385.19005 - Manual (Page 10)

Machine Operating Buttons
Start/stop Button
(1) Start/stop button
Pressing the Start/Stop button will start or stop the machine
in both Conventional and Embroidery sewing modes. When
you press the button to start sewing in the Conventional
mode, the machine will run slowly for the first few stitches,
then accelerate to the speed you have set with the speed
control lever If you want the machine to run slowly for more
than the first few stitches, continue to press the Start/Stop
button. Once you release the button the machine will
accelerate to your set speed.
............
Note:
The Start/stop button cannot be used when the foot
control is connected to the machine.
Reverse Button
if) Reverse button ,, ,
® Patterns 1 , 2 , 3 and 6: cp i ^
The machine will sew in reverse while the reverse button
is pressed.
» All other patterns:
When the reverse button is pressed, the machine will sew
locking stitches immediately and automatically stop
Auto-lock Button
(T) Auto-lock button ^
• Patterns 1 , 2 , 3 and 6 : ,i, i I $ <;
When the auto-lock button is pressed, the machine will
immediately sew locking stitches and automatically stop
“ All other patterns:
When the auto-lock button is pressed, the machine will
sew locking stitches at the end of the current pattern and
automatically stop,
Up/down Needle Button
!i) Up/down needle button
Press this button to bring the needle up or down.
Speed Control Lever
Sewing speed can be varied by the speed control lever
according to your sewing needs.
To increase sewing speed, slide the lever to the right.
To decrease sewing speed, slide the lever to the left.