Starting to sew embroidery, Sewing results – Kenmore 385.19005 User Manual

Page 63

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Ready to Sew

i®)2';'::iC2 i[i

I 54 min I 7cofois

Siffi (...... 115x110mm .

^ I

F: 126x110mm

i,1oailo\v I Pala

Yotiow 2i0

Pafa Sky

O'^

Joa

A-Z

Edit

starting to Sew Embroidery

Press the Pattern Selection key to select the desired

pattern.

Lower the presser foot.

Press the Start/Stop button and sew 5 to

stitches

Press the Start/Siop button again to stop the machine

Raise the presser foot, cut off the loose thread (Jj close

to the beginning of the starting point and lower the
presser foot

(T)

Loose thread

Press the start/stop button to start sewing again.

The machine will stop automatically when the first
color section is finished.
Change the thread and sew the next part

Sewing Results

The embroidery pattern is sewn against the centerlines on
the fabric as shown,

(|) Centerlines on the Fabric

Note:

The embroidery stitch pattern position against the
centerlines is indicated on the template sheets