Bobbin winding – Kenmore 385.19005 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Bobbin Winding
«> Removing the hook cover plate
(T) Hook cover plate release button
(|) Hook cover plate
(3) Bobbin
Slide the hook cover plate release button (D to the right,
and remove the cover plate (|).
Lift out the bobbin (|) from the bobbin hoider,
Horizontal spool pin
tt) Spool pin
(2) Large spooi holder
(|) Small spool holder
Lift up the spool pin
(I),
Place a spool of thread on the
spool pin with the thread coming off the spool as shown.
Attach the large spool hoider tf;), and press it firmly
against the spooi of thread .
The small spool hoider (3) is used with narrow or small
spools of thread.
■> Additional spool pin
(T) Additional spool pin
C|) Spooi pin hole
(|) Spool pin felt
(?) Spool stand
The additional spool pin
(T)
is for bobbin winding, without
unthreading the machine, and for twin needle sewing.
Insert the additional spool pin (J,) into spool stand ()?) and
the hole (|),
Place the felt 'D and a spool on the pin as illustrated.
13