Conventional sewing mode, Utility stitches, Pattern selection – Kenmore 385.19005 User Manual
Page 24: Utility stitches pattern selection
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Conventional Sewing Mode
Press the conventional sewing mode key to enter the
conventional sewing mode
The following four categories are available in this mode:
(T) Utility stitches
You can select 11 types of utility stitches.
i|) Buttonhole stitches
You can select 5 buttonhole variations and eyelet,
1
1) Satin stitches
You can select the desired satin stitches, elongation
patterns and also program assorted stitch combinations
(A)
Decorative stitches
You can select decorative stitches and also program
assorted stitch combinations
Utility Stitches
When you press the Conventional sewing mode key, the
utility stitch window opens.
Pattern Selection
Press the stitch pattern indication key to select the desired
stitch pattern. The following information on the selected
stitch pattern is indicated in the upper window,
(1) Name of stitch
i|) Stitch image
(7) Selected needle type (single or twin)
(8) Recommended pressure dial number
I'l) Recommended thread tension number
(№ Sound mark (the mark will disappear when the sound
volume set to 0)
Cl) Recommended presser foot
C?' Twin needle key
Press the twin needle key to enter the twin needle
sewing mode
&
Needle up/down key
You can set the needle position with this key to have the
needle in the up or down position, when the machine
stops.
(Q) Adjust key
When you press this key, the stitch adjusting window will
open. You can change setting of stitch length and width
by pressing the + or — key.