Eyelet – Kenmore 385.19005 User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Eyelet
® Stitch pattern;
(2) Needle thread tension
(3) Presser foot F:
® Pressure dial
17
1 to 4
Satin stitch foot
3
The eyelet is used for belt holes etc,
Press patter n 17 on the visual touch screen
»To sew
Attach the satin stitch foot F.
Depress the foot control to sew. The machine will stop
automatically when completed.
Open the eyelet with an awl, punch or point scissors
» To adjust the shape of an eyelet
By pressing the adjust key, the manual adjusting screen
will appear . If the sewing result of an eyelet is compressed
or drawn out, try the other types of shape
Press the 4- or the — key to adjust.
(D
Shape adjust key (Sl-shapel, S
2
~shape
2
,
S3-shape3)
(|) Default key
When you press the fc*»* key all function values on
the screen will return to the default setting (the same
settings as when you purchased the machine)
(D
Cancel key
When you press the csraf key, the adjust window will
close and the setting remains unchanged.
(?) OK key
When you press the ^
ok
key, the same window will
close and go back to the or iginal screen with the new
setting being registered.
fsFl
+
(D
40