Modulex ext – AERCO Modulex EXT 1530 - 3060 User Manual
Page 38

MODULEX EXT
1530, 1912, 2295, 2677, 3060 Boilers
Installation, Operation & Maintenance Manual
Figure 3-14: Flue Exhaust Diameter Reduction Adaptor Kit
Table 3-3: Vent Part Numbers
Model
Dia.
Material
Part Number
EXT 1530
EXT 1912 10”
Stainless
Contact vent manufacturer
Polypropylene Contact vent manufacturer
PVC
58115-1
EXT 2295
EXT 2677
EXT 3060
12”
Stainless
Contact vent manufacturer
Polypropylene Contact vent manufacturer
PVC
58115-2
In the case of PVC venting, the flue venting pipe is affixed to the adapter using RTV liquid
silicone and then clamped with a worm-driven Hose Clamp.
When using non-metallic (plastic) venting materials, use schedule 40 or thicker, single-wall,
uninsulated pipes. When using non-metallic (plastic) vent systems for Canadian installations,
per CSA B149.1, use vent systems that are certified to the standard for Type BH Gas Venting
Systems, ULC-S636.
Please note that 10” and 12” PVC can be heavy and expensive. Alternative vent materials, such
as AL29-4C or polypropylene should be considered prior to installation.
The plastic components, primers and glues of the certified vent system must be from a single
system manufacturer and not mixed with other manufacturer’s vent system parts.
GASKET
EUROPEAN-TO-USA
STANDARD FLUE ADAPTER
DIAMETER REDUCTION
ADAPTOR CONNECTOR
WORM-DRIVEN HOSE CLAMP
WASHERS (8 EACH)
SCREWS (8 EACH)
FLUE MANIFOLD
Example Vent Starter Piece
ACCESS POINT FOR
CLEANING (underneath)
Page 38 of 138
AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913
OMM-0095_0E
12/01/14
Phone: 800-526-0288
GF-139