KEYENCE BL-N70 Series - Manual (Page 17)

2-3
2
Conne
ct
ion
s
2-2 Connecting the BL-N70UBE
The BL-N70UBE connects to a PC's USB port, power is supplied through the USB port.
(BL-N70UBE is compatible with PC's running Windows Vista, XP, 2000 or 98)
z Precautions when using the computer
• DO NOT USE THE KEYBOARD WHEN SCANNING BARCODES ! Typing while scanning
barcodes will corrupt the data string.
• If the computer has multiple language settings, make sure that the input mode is set for
half-width alphanumeric characters.
• The keyboard specifications can be selected ( page 3-7).
When BL-N70UBE is first connected to a computer running Windows 98, the USB driver
installation screen appears. Install the driver by following the directions given on the screen.
(This procedure is not necessary when using a computer running Windows Vista/XP/2000).
Procedure
1
The "Add New Hardware Wizard" dialog appears and the message "This window searches
for new drivers for: USB human interface device" is displayed. Click on the [Next] button.
2
The message "What do you want Windows to do?" is displayed. Select [Search for the best
driver for your device (Recommended).] and click on the [Next] button.
Installing the USB Driver
Note
Connect the barcode reader after turning on the computer to ensure that it is
properly detected.
BL-N70UBE
To computer
USB port
(A type)