KEYENCE SJ-F100W/100/010 - Manual (Page 39)

5-3
Spe
cif
ic
at
ion
s
5
5-2
Specifications
This section provides the specifications of the SJ-F100W/100/010.
„ Static Elimination Blower Unit/Controller Unit
* Values obtained by measurement 200 mm from the front of the Static Elimination Blower Unit
„ AC Adapter
Model
Static Elimination Blower Unit SJ-F010
Controller Unit SJ-F100W/100
Voltage application method Variable DC
Applied voltage ±7000 V max.
Ion balance control method I.C.C. method
Static elimination time* 1.8 sec
Ion balance* ±5 V
Max. fan speed* 1.5 m/s
Max. blast 1 m
3
/min
Ozone concentration 0.005 ppm max.
Control input Static elimination stop input NPN open collector or no-voltage contact signal
Control output Alarm output NPN open collector
100 mA (40 V max.)
Ion level alarm output
Condition alarm output
Rating Power voltage 24 VDC ±10%
Current consumption 450 mA max.
Environmental
resistance Operating ambient temperature 0 to +50°C
Operating ambient humidity 35 to 65%RH (condensation not allowed)
Weight Static Elimination Blower Unit Approx. 350 g
Controller Unit Approx. 250 g
Model SJ-U2
Rating Rated input 100 to 240 VAC (50/60 Hz)
Rated output 24 VDC 2.65 A
Environmental
resistance Operating ambient temperature 0 to +35°C
Operating ambient humidity 20 to 80% (condensation not allowed)
Weight Approx. 250 g