KEYENCE SJ-F100W/100/010 - Manual (Page 10)

viii
Precautions on Regulations and Standards
„ CE Marking
Keyence Corporation has confirmed that this product complies with the essential requirements of the
applicable EC Directive, based on the following specifications.
Be sure to consider the following specifications when using this product in the Member State of
European Union.
EMC Directive (2004/108/EC)
• Applicable standard: EN61326-1
• Be sure to provide a ground when installing the SJ-F100W/100/010.
• The length of cable (power lead and I/O leads) must be less than or equal to 30 m.
Remarks:
These specifications do not give any guarantee that the end-product with this product incorporated
complies with the essential requirements of EMC Directive. The manufacturer of the end-product is
solely responsible for the compliance on the end-product itself according to EMC Directive.
Low-Voltage Directive (2006/95/EC)
• Applicable standard: EN61010-1
• Overvoltage category I
• Use this product under pollution degree 2.
• Use the power supply for the SJ-F100W/100/010, that satisfies the requirements of the Limited
Power Source specifications stipulated in EN60950-1 and certified by European third-party
certification organization, or a Keyence Corporation AC adapter (SJ-U2). The specifications of the AC
adapter (SJ-U2) are as follows.
When connecting to an SJ-U2, be sure to use a power cable compliant with European standards.
Applicable standard:
EN60950-1
Overvoltage category II
Pollution degree
2
• Be sure to provide a ground when installing the SJ-F100W/100/010.