KEYENCE SJ-F100W/100/010 - Manual (Page 34)

4-2
4
Mai
nt
enan
ce
4-2
Performing Maintenance on the Electrode Needles
When the SJ-F100W/100/010 is used for a long period of time, the electrode needles become dirty due
to the adhesion of dust and dirt.
If the electrode needles are used in a dirty or dusty state, the static elimination performance can no
longer be fully demonstrated, resulting in accidents or malfunction. Be sure to periodically perform
maintenance on the electrode needles.
Performing Maintenance on the Electrode Needles
1
Remove the Electrode Unit
Unlock the lock switch on the Static
Elimination Blower Unit, and pull out the
Electrode Unit in the direction of the arrow.
2
Clean the electrode needles.
Clean the electrode needles with a cotton
wool bud moistened with alcohol.
• Before removing the Electrode Unit, turn the SJ-F100W/100/010 OFF.
• Do not directly touch the electrode needles with your hands. Doing so might
cause personal injury. Pay attention to this when performing maintenance on
the electrode needles.
WARNING
SJ-F010
SJ-F010
Unlock the lock switch.
Remove the Electrode Unit.