KEYENCE SJ-F100W/100/010 - Manual (Page 20)

2-1 Before Installation
2-2
2
Co
nnect
ion and I
nst
all
at
io
n
„ Appropriate static elimination method
Pay attention to the following points to ensure that
static elimination is performed appropriately.
Static elimination cannot be performed
accurately at locations where the target object
is touching a metallic body (earthed body).
Eliminate static from the target body at locations
where it is not directly touching metallic bodies
(earthed body).
Static will be eliminated from only the surface
of the insulated body (film, sheet, etc.) that is
facing the Static Elimination Blower Unit.
When eliminating static from both sides of a target
body, install two SJ-F100W/100/010s as one
SJF100W/100/010 must be installed on either side
of the target body.
Install the Static Elimination Blower Unit so that it can example, for replacement
of parts and cleaning.
SJ-F010
Metal roller
Film, sheet or other
electrically charged object
OK
NG
OK
Note