KEYENCE LK-HD1001 - Manual (Page 21)

2-3
2
2 Screen Functions and Operation
Flow of Operation
This explanation will show how to assign the input at HEAD01 to the output at OUT01 when
turning the touch panel on for the first time.
1
Connect the controller and touch panel (Page 1-12).
2
Start the controller, then turn on the touch panel.
3
On the "Environment settings" screen, specify the number of heads, OUTs,
and analog outputs being used (Page 2-21).
4
Select a program number (Page 2-23).
5
Specify the "Common settings" (Page 2-16).
6
Configure "HEAD01" (Page 2-4).
7
Configure "OUT01" (Page 2-9).
This completes the procedure.