Compex Performance - Manual (Page 311)

309
English
The Compex Performance is designed for use in the electromagnetic
environment stipulated below. The buyer or user of the Compex
Performance must ensure it is used in this recommended environment.
- ELECTROMAGNETIC IMMUNITY
NOTE: VT is the AC supply voltage before application of the test
level.
Electromagnetic
environment - recommendations
Floors must be wood, concrete or ceramic tiles. If floors are covered with synthetic material,
the relative humidity must be maintained at a minimum of 30%.
The quality of the power supply should be that of a typical commercial or hospital environment.
The quality of the power supply should be that of a typical commercial or hospital environment.
The quality of the power supply should be that of a typical commercial or hospital environment. If
the Compex Performance user requires continuous operation during mains power cuts, we
recommend that the Compex Performance is powered by a UPS or a battery.
Magnetic fields at the mains frequency should be at the level of a representative site located in
a typical commercial or hospital environment.
PERFORMANCE FR DE IT ES EN:ENGY Man FR 14/02/08 15:12 Page 309