BUCHI KjelSampler K-377 - Manual (Page 79)

6 Operation
79 K-375/376/377 Operation Manual, Version B
6 .6 .3 Sample Lists
With the sample list functionality it is possible to predefine a complete list of samples to be deter-
mined one by one without a sampler. Each sample list can be filled with any number of predefined
samples. If all samples of a sample list are selected at once for the determination, they will be deter-
mined in the same order they were added to the list. It is also possible to determine the samples in a
different order by selecting individual samples from the list.
The type (Blank, Sample, Reference substance or Control blank), and name of each sample can
be chosen freely. The same applies for the used method and the result group for the storage of the
result.
For samples in addition the weight and the protein factor have to be specified. If a compatible
balance is connected to the instrument, the weight of each sample can be automatically taken over
from this balance.
NOTE
For each new sample the entries of the previously entered item are used as default values (the default
value for the name depends on the type of the sample – in this case the name of the last sample of
the same type is taken as default). All default values can be overwritten.
To start a sample list determination you have to enter the list and to select the samples to be deter-
mined. To select a complete list simply check the check box in front of the first sample and check
and hold the check mark in front of the last sample in the list or use
SELECT ALL. As a result all
samples in between will also be checked. (This will also work for deselecting a larger number of
samples.) To exclude samples from the determination uncheck the check mark in front of the sample
in question.
Once a sample has been determined (with or without a valid result) it is deleted from the list and the
next sample in the list becomes sample number one (the next sample to be determined). After all
samples of a list have been processed, the empty list remains on the device (it can either be refilled
with samples for the next determinations or deleted manually).
The Sample Lists screen shows a list of all
present Sample Lists.
New Sample Lists can be created with NEW and
existing ones can be deleted, renamed or copied.
It is also possible to import sample lists that have
been set up on a personal computer from a USB
device or a network place.
User with administrator rights can also lock and
unlock sample lists.
NOTE
Locked sample lists can not be edited and the
contained samples can not be determined but
they can be used as template by copying them.