Switch on, Set the volume, Wiedergabe des demonstrationsspiels – Yamaha SHS-200 User Manual
Page 6: Einschalten, Einstellen der lautstärke, Mise sous tension, Réglage du volume, Reproducción de demostración, Conecte la alimentación, Ajuste el volumen
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Playing Back The
Demonstration
To give you an idea of what the versatile
SHS-200 can do, a demonstration has
been included so you can hear some of
the many exciting sounds it can produce.
1. Switch On
Slide the POWER switch © to the "ON”
position. The LED indicator ® will
illuminate, displaying "00".
2. Set The Volume
Slide the VOLUME control © about three-
quarters of the way toward the maximum
(MAX) setting.
Wiedergabe des
Demonstrationsspiels
Um Ihnen eine Vorstellung davon zu
vermitteln, was in dem vielseitigen SHS-
200 steckt, wurde das Instrument mit der
Funktion eines Demonstrationsspiels
ausgestattet, so daß Sie sich umgehend
von der enormen Klangvielfalt
überzeugen können.
1. Einschalten
Stellen Sie den Netzschalter POWER ®
durch Schieben nach rechts auf
Die LED-Anzeige ® leuchtet auf und zeigt
POWER
2. Einstellen der Lautstärke
Schieben Sie den Lautstärkeregler
VOLUME © etwa 2 Drittel in Richtung der
maximalen (MAX) Einstellung,
Exécution de
démonstration
Pour avoir une idée de toutes les
possibilités offertes par le SHS-200, un
morceau de démonstration a été incorporé
permettant d’écouter toute la gamme des
sons que cet instrument est capable de
produire.
1. Mise sous tension
Faire coulisser l’interrupteur POWER ©
sur la position “ON”. L’indicateur à DEL (S)
s’allume et affiche “00”.
2. Réglage du volume
Faire coulisser la commande VOLUME ©
vers la position maximum (MAX) jusqu’à
environ trois-quart de sa plage.
W W M A X
VOLUME
Reproducción
de
demostración
Para ofrecerle una idea de la versatilidad
del SHS-200, se ha incluido música de
demostración a fin de que usted pueda
escuchar algunos de los muchos y
excitantes sonidos que el instrumento
puede producir.
1. Conecte la alimentación.
Deslice el interruptor POWER
© hasta la
posición
El indicador de LED (íe) se
encenderá visualizando 'W.
2. Ajuste el volumen.
Deslice el control VOLUME ©
aproximadamente tres cuartos de su
recorrido hacia el ajuste máximo (MAX).