Panasonic PV-DV901 - Manual (Page 53)

B Listening to Playback Sound Through
Headphones (-► 28)
If you want to listen to the playback sound of a tape through
headphones, set [AV JACK] on the [AV IN/OUT SETUP]
Sub-Menu to [OUT/PHONES] and connect the headphones
to the [PHONES] Jack on this Palmcorder. In this case, no
sound (including a warning sound and shutter sound) will be
reproduced through the built-in speaker of the Palmcorder.
When the AA/ Cable is inserted into the AV Jack, the internal
speaker works.
■ Selecting the Sound during Playback
(-» 28, 33)
You can select the sound by using the [AUDIO OUT) on the
[PLAYBACK FUNCTIONS] Sub-Menu.
STEREO: Stereo Sound (main sound and subsound)
L: Left channel sound (main sound)
R: Right channel sound (sub sound)
• If you dub a tape recorded at the [I2bit] selected as the
[AUDIO-REC] setting, playback sound becomes stereo
sound regardless of whether [AUDIO] is set to [MIX] or to
[AUDIO OUT].
■ Audio Dubbing {-¥ 33)
• The blank section of a tape cannot be dubbed.
• Sounds sent through the DV Terminal cannot be dubbed.
• If a tape has a non-recorded portion when the tape is
dubbed, images and sounds may be disturbed when this
portion of the tape is played back.
• If you set the tape counter back to 0 at the position where
you want to stop Audio Dubbing so as to make it possible
to use the Memory Stop function (-♦ 57), Audio Dubbing is
terminated automatically when the tape reaches this
position.
• In the case of importing data recorded with Audio Dubbing
to a Computer using the Computer's software program,
only the original sound (ST1) may be imported, depending
on the software program.
Microphone Jack
When audio dubbing is carried out through an external
microphone or audio equipment, connect it to the [MIC] Jack.
In this case, the built-in microphone of the Palmcorder will be
turned off.
■ Using with Digital Video Equipment
(Dubbing) (-»41)
• Regardless of the setting, dubbing is carried out
automatically in the same audio recording Mode as that of
the Cassette in the playback-side equipment,
• The images on the monitor of the recording side may be
disturbed, but it does not affect the recorded images.
• Even if Playback Digital Effects, Playback Zoom, or
Playback Title In have been used, these effects are not
output from the DV Terminal.
• Even if you use device with DV Terminals (such as i.LINK),
you may not be able to perform digital dubbing in some
cases.
■ Card Functions (-»34-39)
• Do not touch the connector terminal located on the back of
the card.
• If the Card Slot Cover is open, the card cannot be
accessed.
• Wide images cannot be recorded on the Memory Card.
• A card that was formatted with this Palmcorder may not be
usable in other equipment. If this happens, please format
the card with the equipment with which the card is to be
used. Before proceeding with this operation, we suggest
that you take the precautionary measure of storing
important images in your personal computer.
• In the Card Photoshot mode, the Palmcorder automatically
saves the file numbers (tmgaOOOl jpg, etc.) along with the
pictures. A file number is recorded with each picture as a
running number.
■ Recording to a Card from other equipment
(-» 34, 40)
If you set the [TAPE/CARD] Selector to [CARD], you can use
the Card Photoshot Function for externally input signals.
(Not during recording.)
• Black streaks may appear at the four edges of the image.
• When the [PHOTO SHOT] Button Is pressed, the image
may seem to move backward momentarily, but this does
not affect the recording.
■ Mega-pixel recording (-» 34)
• The Progressive Function is set to [ON],
• The shutter speed becomes 1/30-1/500.
• When viewed on a TV or liquid crystal monitor, image
quality deteriorates slightly.
• The screen becomes wider sligtly.
• Mega-pixel images cannot be recorded on a cassette as a
Mega-pixel picture.
■ Card Playback (-» 35)
• In the case of displaying memory images on a Multi screen,
if there are 7 or more images, they cannot be displayed all
at once. Rotate the [PUSH] Dial or use the [—SEARCH]
Button or [SEARCH-F] Button to display the next 6 still
pictures.
• When the pictures recored by another Palmcorder are
played back with this Palmcorder, the size of the pictures
may be different from the recorded size.
■ Title Functions (-» 37)
• Regardless of the [PICTURE SIZE] setting, the size of
created title picture is [640X480].
• If you create an original title, the number of pictures that
can be recorded on the Memory Card decreases.
• If the number of pictures that can be recorded on the
Memory Card is small, you may not be able to create an
original title in some cases.
• When a title is displayed in VCR Mode, the title is not
output from the DV Terminal or Digital Still Picture
Terminal.
• When the [TAPE/CARD] Selector is set to [CARD] and
[1200X900] is selected for [PICTURE SIZE], titles are not
displayed.
■ DPOF setting (-» 39)
• The number of prints can be set from 0 to 99.
• Perform DPOF setting on the Palmcorder you are using.
• It may take some time to verify the DPOF setting. Please
wait until the [ACCESS] Lamp goes off.
53